Program Maintenance Of The Glove Box
Etelux reminds you that in addition to the normal inspection of the glove box, the day-to-day upkeep function of the glovebox is also required
1. Before and following each individual do the job, first clean up the ecosystem to make the ground dry and clear. Then clean up the tools, including the internal and outer surfaces of the glove box, the observation method, the operate surface, and many others., to be free of charge of particles and cleanse.
two. Meticulously document the h2o, oxygen information, and gasoline intake of the equipment in the glove box just about every working day to avoid inadequate gasoline force and cause the gear to halt functioning.
3. Pay back interest to the quantity of gas in the working fuel cylinder at any time and replace it in time.
four. In scenario of electrical power failure, press the "vacuum pump" button on the panel to make the vacuum pump operate soon after electricity on
five. Note: Right after power on, if there is a dilemma that it cannot get started, the likelihood is that the vacuum pump electric power cable is loosely connected. The second motive is that the vacuum pump’s individual switch is not turned on
6. When you want to put the sample into the Glove Box Application box, use a modest changeover chamber as significantly as attainable. In advance of opening the transition doorway, spend interest to no matter whether the force gauge pointer on the valve cavity is at the zero situation. If it is, you can open up it right if not, you have to have to convert the swap below the valve cavity to the "filling" placement to let the gas enter the glove box changeover compartment, and then transform the change back to the intermediate place, then you can open up the transition compartment Put the sample in the door, and then near the door. When positioning samples, be cautious not to contact the inner wall of the changeover chamber with your palms, dress in gloves to select and put the sample
Carrying out these program routine maintenance tasks can minimize the decline rate of the glove box, prolong the company life of the glove box, and also lower the event of incidents