Plan Routine Maintenance Of The Glove Box

Aus Oszillopedia
Wechseln zu: Navigation, Suche

Etelux reminds you that in addition to the normal inspection of the glove box, the daily upkeep operate of the glovebox is also necessary

1. Just before and soon after each and every get the job done, to start with thoroughly clean the environment to make the ground dry and clean. Then clean the equipment, like the internal and outer surfaces of the glove box, the observation process, the do the job area, and so on., to be free of charge of debris and clean up.

two. Carefully document the drinking water, oxygen material, and fuel consumption of the gear in the glove box just about every day to stay away from insufficient gas strain and lead to the equipment to prevent working.

three. Pay focus to the quantity of gas in the doing the job fuel cylinder at any time and change it in time.

four. In case of power failure, press the "vacuum pump" button on the panel to make the vacuum pump run right after ability on


5. Notice: Just after energy on, if there is a trouble that it can not commence, the possibility is that the vacuum pump ability cable is loosely linked. The 2nd motive is that the vacuum pump’s have swap is not turned on


six. When you want to put the sample into the glove box, use a modest transition chamber as considerably as attainable. Just before opening the changeover doorway, pay out notice to irrespective of whether the force gauge pointer on the valve cavity is at the zero placement. If it is, you can open up it right if not, you will need to flip the change underneath the valve cavity to the "filling" placement to let the gas enter the glove box changeover compartment, and then convert the switch back again to the intermediate placement, then you can open the changeover compartment Place the sample in the doorway, and then close the door. When putting samples, be careful not to contact the internal wall of the changeover chamber with your palms, dress in gloves to decide and spot the sample



Performing these plan servicing responsibilities can lower the reduction charge of the glove box, increase the assistance existence of the glove box, and also minimize the occurrence of accidents